How to maintain the car wiper in the rainy season

How to maintain car wipers in rainy summer

Summer is the rainy season, and car wipers need to be used frequently. However, because many car owners do not pay attention to its daily maintenance, problems often occur during use. Wiper wiper maintenance is very convenient, all car owners only need to pay more attention to maintenance.

    Band streaks: The support point of the wiper arm of the car's bone wiper was not found, resulting in that not every part of the wiper strip is in full contact with the glass; improper arm pressure or damage to the upper structure, or even improper rain Scrapers can cause such phenomena.

Fog streaks: A layer of oily film is distributed on the windshield with the use of the wiper, usually caused by dirt, dirt or car wax adhering to the glass; the wiper strip is also polluted by car wax and oil. This phenomenon.

　　 fine water phenomenon: when the wiper wipes the windshield,

　　 There are still small water droplets sticking to the glass surface. This phenomenon is caused by the adhesion of car wax, oil stains or silicide to the windshield, adhesive strip or the quality of the adhesive strip itself.

　　 "click" sound or harsh noise: When the wiper wipes irregularly, it is mostly caused by the wear of the rubber strip, the damage of the arm and the bracket, and the aging and deformation of the rubber strip. In the absence of lubrication, there will be friction noises when the wiper wipes the glass.

　　 car boneless wiper lift phenomenon: nowadays, it is common in vehicle aerodynamics, especially on long-size wipers. When a car is driving at a high speed, the wiper will rise due to the wind, resulting in part not being swept, which is a phenomenon.

Cracking of the rubber strip: The use of the rubber strip has a certain lifespan. After the raging of cold and hot acid and alkali, it is inevitable that it will harden and crack or peel off. Some wiper blades will fall off directly on the wiper arm. If the quality is poor The rubber strip will damage faster.

　　 Rubber strip hardening: Due to direct sunlight and high temperature, the wiper strip of the wiper blade hardens and loses its elasticity.

　　 Damage to the upper structure: Damaged by ice shovel or external force, causing damage to the wiper rod structure.

　　 Corrosion or abrasion of the rubber strip: Bad weather, improper use of cleaning products or under-standard rubber strip formulations will cause the edge of the wiper strip to be broken or completely worn.

　　Strip stain: The oil stains accumulated on the wiper blade for a long time, and the car wax attached to the wiper blade will create a gap between the windshield and the windshield, and it will not be able to completely wipe the water. If the above situation of the wiper cannot be solved in time, your wiper will deteriorate further and scratch the glass, which will seriously affect driving safety.

This article is original by the wiper motor manufacturer, please indicate http://www.c-eu.cn/