Combination form and use condition of car wiper

The use of windshield wipers in cars is still very stable, and as the main auto parts, the use of this kind of windshield wipers is very valuable for the driving of city cars. Car inspection is also very important. Here is an introduction to the combination and cleaning of car wipers. The car wiper basically has four parts: swing arm, bracket, connecting swing arm, bracket mounting button and rubber strip. The wiper strip and the wiper blade are in direct contact with the glass.

      Its texture directly reflects the quality of the wiper. Use eyes to distinguish whether there are cracks, cracks, rust, deformation, attachments, discoloration, etc.; use ears to distinguish whether the wiper is making abnormal sounds such as jumping or shaking when in use; distinguish whether rubber is hardened and whether metal parts are hardened by hand Looseness, etc., you can find out whether the car's bone wiper is ready to be replaced. Look at the symptoms from the windshield during use. It is difficult to see the outside to see if there are slender streaks left. This is because there is foreign matter on the wiper blade or the edge part is worn, so the edge part should be cleaned. If the symptoms have not resolved, it needs to be replaced. The windshield wiper makes noise, jumps and cannot rotate smoothly. This is because the glass is attached with wax or the rubber is deformed. The windshield should be cleaned and replaced if the symptoms persist.

This article is original by car wiper manufacturer, please indicate http://www.c-eu.cn/