Elasticity of car boneless wiper

     The four parts of car boneless wiper blades are composed of wiper strips, boneless wiper blades, wiper cover and plastic parts. Among these components, its bracket is made of stainless steel, the steel sheet is carbon steel and its length is between 10 and 28 inches, the thickness of the bracket is 0.80~0.90 mm, and the width is usually 7.00~14.00 Mm.

       The steel sheet in the car boneless wiper mainly uses a whole conductive steel strip to disperse and concentrate the pressure, so that the pressure on each part of the wiper blade is more uniform, which can reduce water marks and scratches. effect. The outer layer of the steel sheet is covered with an electroplated layer, which makes it more resistant to rust.

       In addition to appeals, the elasticity of the car's boneless wiper blade is better than that of ordinary boned steel brushes, which can reduce the wear caused by shaking, and it has a relatively uniform force to prevent the sun, and the structure is relatively simple. .