Contactor for automatic switching

       The wiper motor needs to be used in conjunction with a contactor when it is running, and this contactor can handle the switch itself.

        The contactor matched with the wiper motor is used to connect or disconnect the load-generating circuit through external signals such as the closing or breaking of the contact points in the electrical appliance. This is because when the wiper motor is used in conjunction, the signal from the wiper motor is judged to see if the working pressure is excessively loaded. If the pressure load is too large, a contactor is required to close it. The cooperation is to provide a certain guarantee for the safety performance of the wiper motor.

        And this equipment does not need to perform high-frequency replacement inspections for maintenance. It only needs to perform regular inspections to avoid major problems. When there is a load, it will automatically cut off. Manuals do not need to be constantly watching. Therefore, resources on personnel can be saved.