Correct steps for installing wiper blades

   After buying wiper blades in 4S shops or some auto parts shops, many customers often have no installation experience and do not know how to install them. Then the editor will tell you a few correct steps for installing wiper blades.

    The correct steps to install the wiper blade:

    1: Pull up the wiper arm in front of the car, open the buckle, and remove the old wiper blade. In this step, put a towel on the glass to prevent the wiper arm from scratching the glass.

    2: The left and right directions must be distinguished when installing the wiper blades. For example, the missing parts of the wiper blades on the left and right sides of some vehicles are very obvious. For example, the length and curvature are different. If the wiper blade is installed incorrectly, the wiper effect will be affected.

    3: According to the type of wiper arm used, select appropriate accessories.

    4: Install, there will be an obvious sound when closing the buckle, indicating that it has been successfully closed.

    5: Test to test whether the safety effect of the wiper blade is good. It is important to sprinkle some water here to avoid dry scratches and scratches on the glass.

    As long as you pay attention to these steps, I believe you can immediately learn to replace the wiper blade by yourself.

About the maintenance guide of car wiper

Car wiper blade