Talking about the failure of automobile wiper manufacturers

When using car wiper products, many users find that they are quite easy to use when they are installed, but after using them for a period of time, they find that they are not so easy to use. Either the scratch is not clean, or there is vibration or abnormal noise during use. . So how should these situations be dealt with?

How to control the car wiper

     The first is the problem of unclean car wipers. The main reason for many car wipers is that the car glass is not cleaned, and there are some attached objects on the car glass, which can cause great damage to the car wiper. , Long-term unclear car windows will cause the wiper to be quickly damaged and aging, so the car windows should be cleaned frequently while using the car wiper

。

Suzuki wiper arm

     The car wiper strip is frizzy, which is one of the reasons that the car wiper is not clean. If the rubber strip is not aging and hard, then just sand the rubber strip. Wipe off the fine particles on the rubber strip when driving.

     The angle of the car wiper is wrong, which is a very dangerous problem for the driver in driving. The angle is wrong and the scraping range is wrong. It will increase blind spots and cause safety when driving on the road. It is found that the angle of the car wiper is not adjusted in time.