Wiper arm

The wiper assembly includes a car wiper arm, which is a strip supporting the wiper in the front of the car. It is the part where the wiper is connected to the car. The wiper is equivalent to a human hand, and the wiper arm is like a human arm.
HOME >> PRODUCT >> Wiper arm
PRODUCT NAME:

Wholesale wiper arm

PRODUCT INTRODUCTION:

1. Remove the cover of the installation part of the wiper arm.
2. Loosen the fixing nut and remove it.
3. Put the wiper arm in an upright position, and then move it slightly to fall off.
4. Install the wiper blade on the new wiper arm.
5. Tighten the nut at the stop position of the wiper, and finally install the cover.

support hotline:

+86-593-7877777 7877333

Consult online now
PRODUCT DETAILS

1. Remove the cover of the installation part of the wiper arm.

2. Loosen the fixing nut and remove it.

3. Put the wiper arm in an upright position, and then move it slightly to fall off. 

4. Install the wiper blade on the new wiper arm. 

5. Tighten the nut at the stop position of the wiper, and finally install the cover.


RELATED PRODUCTS
LATEST NEWS
  • Must the wiper blades be repla···
  • Glass water helps protect car ···
  • Analysis of common failures of···
  • The solution to the car wiper ···
  • Improper car washing can easil···
  • Is the rainstorm hitting your ···
  • Maintenance of car glass and c···
  • Daily use of car wipers should···