Why do you want to remove the wiper motor at will

Why do you want to remove the wiper motor at will

1. Check the wiper blades of car wipers regularly. When the wiper blade is found to be seriously worn or dirty, it should be replaced or cleaned in time, otherwise it will reduce the working efficiency of the wiper and affect the driver's sight. When cleaning the wiper blades, you can use alcohol cleaner

The cotton yarn gently wipes off the dirt on the scraper. The wiper should not be cleaned and soaked with gasoline, otherwise the wiper will deform and affect its work. 2. When checking the working condition of the wiper, you should first wet the windshield with water, otherwise the glass will be scratched. At the same time, due to the large frictional resistance of the wiper, the wiper may be damaged or the motor may be burned. After turning on the wiper switch, pay attention to whether the motor has any abnormal noise, especially when the wiper motor "buzzes" and does not rotate, it means that the mechanical transmission part is rusted or stuck, and the wiper switch should be turned off immediately to prevent burning Motor.

3. After turning off the wiper switch during use, the wiper blade should return to the lower side of the windshield and stop. If the stop position is wrong, it should be adjusted. When adjusting, you can turn the cover of the automatic stopper, turning clockwise to shorten the stop position, and turning counterclockwise to extend the stop position.

4. When using the car's boneless wiper in winter, if its blade is frozen or stuck in snow, turn off the switch immediately and remove the ice and snow before continuing to use it, otherwise the motor will burn out due to excessive blade resistance .

5. Do not remove the motor at will. If it is necessary to remove the motor due to a malfunction, do not drop or bump the motor. Because wiper motors mostly use permanent magnet DC motors, their magnetic poles are mostly ceramic materials, which are easily damaged by impact.

6. Wiper motors are mostly enclosed and cannot be disassembled at will. When it is necessary to disassemble, keep the interior clean, and do not allow dirt such as iron filings to fall into it; when assembling, add a little lubricating oil to the felt of the oil-containing bearing, and replace or supplement the grease in the reducer. [

This article is original by the manufacturer of car bone wipers, please indicate http://www.c-eu.cn/