Experts on car wipers suggest how to extend the life of wipers

Experts on car wipers suggest how to extend the life of wipers

　　A good windshield wiper must have the characteristics of heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, can fit the windshield, reduce the burden on the motor, low noise, strong water repellency, soft and not scratch the windshield. Temperature changes, sand, gravel, dust, etc. will shorten the life of the wiper blade. To prolong the life of the car's bone wiper, clean the dirt on the windshield and wiper blade frequently, especially after it rains, to clean it effectively, so that the wiper can reduce unnecessary wear.

When the wiper blade has poor wiping, first separate the wiper blade from the windshield, soak the wiper blade with water, then grind the wiper blade back and forth 4 to 5 times with 800# water sandpaper, then clean it with clean water and put it back. can.

How to change the wiper by yourself

　　The replacement of the wiper blade is also very simple. The fixing of the wiper blade is usually a U-hook type, and the wiper blade can be removed by pulling the hook up, but the new and old wiper blade models must be the same. After replacing the wiper, you can wet the windshield and observe whether the wiper is operating normally and whether the wiping effect is good.

The replacement method of the wiper motor is: first remove the cover of the wiper arm installation part, and at the same time, loosen the fixing nut and remove it, and then put the wiper arm in an upright position. Fall off. Then, install the wiper blade on the new wiper arm. Tighten the nut at the stop position of the wiper and install the cover.

This article is original by the manufacturer of car boneless wiper blades, please indicate http://www.c-eu.cn/