Six elements of wiper blade maintenance

Six major elements of wiper blade maintenance:

1. Sand and foreign matter on the glass surface

Approach:

1. When there is less dust, spray glass water first and then use the wiper;

2. When there is a lot of dust or fallen leaves, first rinse the surface of the glass and wiper blade with clean water, and then spray glass water for further cleaning;

Talking about the Causes of Wiper Blade Failure

2. Treatment method of frost and snow on the glass surface:

1. Snow and frost on the glass surface:

-Use snow removal shovel (hard plastic card is also acceptable) to remove frost;

-Turn on the air conditioner to defrost, use the wiper blade after the frost melts;

2. Wiper blades and windshield are frozen:

-Use warm water to melt the icy surface of the wiper, then wipe the wiper and glass with a dry towel

Three, stubborn foreign body adhesion

Car wiper blade

Approach:

1. Use a cloth dipped in glass water (plastic cards are also available) and wipe repeatedly

four

Reminder

1. When the windshield is dusty, the surface is frost, bird droppings, insects or other foreign objects stick to the glass, first clean it up with the above methods, otherwise the direct use of the wiper blade will cause excessive wear and reduce the service life;

2. In winter, please add anti-freeze glass water according to the local temperature environment to avoid damage to the glass and wiper system.

3. Wiper blades are guaranteed for 6 months/5000KM (whichever comes first)